Altus Strategies Plc / Index (EPIC): AIM (ALS) & TSX-V (ALTS) / Sector: Mining
Altus Strategies Plc
(“Altus” or the “Company”)
Altus Strategies Plc (AIM: ALS, TSX-V: ALTS, OTCQX: ALTUF) announces the commencement of a 3,800m drilling programme at its Lakanfla gold project (“Lakanfla” or the “Project”) located in western Mali. The programme is being funded by Marvel Gold Limited (ASX: MVL) (“Marvel”) under the joint venture (“JV”) with Altus.
- JV-financed 3,800m drill programme underway at the Lakanfla project in western Mali
- Targeting a karst-style target analogous to Yatela and the FE3 / FE4 deposits at Sadiola
- Lakanfla hosts extensive hard rock artisanal gold workings
- Historic drilling has returned high grade intersections, including (not true widths of interval):
- 1 g/t Au over 26m from 32m
- 3 g/t Au over 18m from 34m
- Passive seismic geophysical survey across karst-style targets to commence shortly
- Marvel is earning an initial 33% interest in the Project under the JV
- Altus holds a 2.5% Net Smelter Return (“NSR”) gold royalty on Lakanfla
Steven Poulton, Chief Executive of Altus, commented:
“We are excited to announce the commencement of a 3,800m drilling programme at our Lakanfla gold project in western Mali. The drilling is targeting a karst-style geological model, defined by an approximate 7km long gravity-low that surrounds a granite intrusion. Lakanfla hosts extensive hard rock artisanal gold workings and historic shallow drilling has intersected up to 5.1 g/t Au over 26m. The karst-style model represents an exciting target at Lakanfla and is analogous to certain pits at Sadiola and the former Yatela gold mine, located 6km and 30km to the northwest respectively.
“The programme is being funded by our ASX-listed JV partner Marvel Gold, which is earning an initial 33% interest in the Project. We look forward to updating shareholders on the results from the drilling in due course.”
Lakanfla Project: Drilling Programme
The planned 18-hole programme will total 3,800m and employ a multipurpose drill rig capable of Reverse Circulation (“RC”) and Diamond Drilling (“DD”). RC drilling is expected to better handle the variable lithological and ground conditions in the karst target areas, resulting in the maximum amount of sample being collected. The programme will test four karst-style gravity-low targets which surround a major granitic intrusion.
Passive Seismic Programme
Marvel will also be undertaking passive seismic surveys over the gravity lows at Lakanfla. These surveys are used to identify density contrasts between various lithologies up to 700m below the surface. Marvel believes the density contrast between dissolved carbonates and fresh rock can be used to model the base of the gravity lows in three dimensions. This data can then be calibrated against the drill results to aid target generation for follow-up drilling.
Summary of Joint Venture with Marvel Gold
Marvel have the right to earn up to an 80% interest in Lakanfla by sole funding four stages of exploration, culminating in a definitive feasibility study, and by making certain cash (or cash plus Marvel equity) payments to Altus. Thereafter, Altus has the right to co-fund or dilute its interest in the Project. Altus will retain a 2.5% NSR royalty on the Project and Marvel have the right to reduce the NSR to 1.0% for a payment to Altus of between US$9.99M and US$15.00M (subject to the size of the resource at Lakanfla).
The following figures have been prepared and relate to the disclosures in this announcement and are visible in the version of this announcement on the Company's website (www.altus-strategies.com) or in PDF format by following this link: https://altus-strategies.com/site/assets/files/4927/altus_nr_-_lkf_drilling_06_oct_2020.pdf
- Location of Lakanfla and Altus’ other projects in Mali is shown in Figure 1.
- Location of Lakanfla with respect to the Sadiola and Yatela deposits is shown in Figure 2.
- Plan of the Lakanfla drilling programme is shown in Figure 3.
- Schematic cross-section of Lakanfla geology and karst model is shown in Figure 4.
Figure 1. Location of Lakanfla and Altus’ other projects in Mali
Figure 2. Location of Lakanfla with respect to Sadiola and Yatela deposits
Figure 3. Plan of the Lakanfla drilling programme
Figure 4. Schematic cross-section of Lakanfla geology and karst model
Lakanfla Project: Location
The 24km2 Lakanfla gold project is located 5km east of the Company’s Diba (‘Korali Sud’) oxide gold project and approximately 6.5km southeast of the karst-type FE3 and FE4 open pits of the multi-million ounce Sadiola gold mine and 30km southeast of the former multi-million ounce Yatela karst-type mine. Lakanfla is bounded by the Sadiola permit area on its north, west and southern boundaries. Sadiola and Yatela are being acquired by Allied Mining from the existing operators Anglogold Ashanti (JSE: ANG, NYSE: AU and ASX: AGG) and IAMGOLD Corporation (TSX: IMG & NYSE: IAG). Mineralisation hosted on these properties is not necessarily indicative of mineralisation hosted at Lakanfla.
Lakanfla Project: Geology
Lakanfla hosts a consistent series of geophysical lows, as defined by a ground gravity survey completed in 2014. The lows are up to 0.5km wide and have a total strike length of approximately 4km. They are hosted within marbleised lithologies surrounding a granodiorite intrusion and its associated hydrothermal aureole. Surface sagging features, considered to be a result of the formation of dissolution voids at depth, have been mapped as being more than 100m long in places and these are also often coincident with the gravity lows. A number of the gravity lows are adjacent to N-S trending artisanal gold workings and are coincident with apparent gradient array IP resistivity lows. Interpretation of the residual IP anomalies has defined a series of intersecting regional and local shear structures, which are considered to have potentially promoted the karst formation process. The gravity lows and lithological trends may indicate areas of deep weathering of altered calcareous sediments, dissolution collapse and potential supergene gold deposition.
None of the priority gravity low targets defined by Altus have been systematically drill tested to date. Of the historical drilling that has been undertaken at Lakanfla, 35 holes coincide with the priority targets. However, the majority of these holes were drilled were no deeper than 75m vertical depth. One was drilled deep enough to test the karst potential, attaining a vertical depth of 161m. Critically, this drill hole (04KDD-08) was located on the margin of a gravity low, reached the target depth and terminated in loosely consolidated sand (from 165m to 171m), having also passed through voids and unconsolidated material. The Company considers that this hole provides strong evidence for the presence of a potential karst-type system.
Karst style deposits are known to form from the dissolution and collapse of carbonate (limestone) rocks. The weathering of these rocks, if originally mineralised with low grade gold and sulphides, can result in the precipitation of a higher grade ‘supergene’ and potentially economic gold mineralised residuum, above a more resistant basal layer. The dissolution of the limestones often means such deposits are associated with geophysical gravity lows, resulting from the formation of voids at depth. They may also contain sands and other more recent geological materials occurring unconformably in the geological sequence. These materials will have either been windblown, or collapsed into the depression created during the karstification (dissolution) process.
The technical disclosure in this regulatory announcement has been approved by Steven Poulton, Chief Executive of Altus. A graduate of the University of Southampton in Geology (Hons), he also holds a Master's degree from the Camborne School of Mines (Exeter University) in Mining Geology. He is a Fellow of the Institute of Materials, Minerals and Mining and has over 20 years of experience in mineral exploration and is a Qualified Person under the AIM rules and National Instrument 43-101 “Standards of Disclosure of Mineral Projects of the Canadian Securities Administrators”.
For further information you are invited to visit the Company’s website www.altus-strategies.com or contact:
Altus Strategies Plc
Steven Poulton, Chief Executive
Tel:+44 (0) 1235 511 767
SP Angel (Nominated Adviser)
Richard Morrison / Soltan Tagiev
Tel: +44 (0) 20 3470 0470
SP Angel (Broker)
Abigail Wayne / Richard Parlons
Tel: +44 (0) 20 3470 0471
Yellow Jersey PR (Financial PR & IR)
Georgia Colkin / Charles Goodwin / Henry Wilkinson
Tel: +44 (0) 20 3004 9512
About Altus Strategies Plc
Altus Strategies (AIM: ALS, TSX-V: ALTS & OTCQX: ALTUF) is a mining royalty company generating a diversified and precious metal focused portfolio of assets. The Company’s focus on Africa and differentiated approach, of generating royalties on its own discoveries as well as through financings and acquisitions with third parties, has attracted key institutional investor backing. The Company engages constructively with all stakeholders, working diligently to minimise its environmental impact and to promote positive economic and social outcomes in the communities where it operates. For further information, please visit www.altus-strategies.com.
Cautionary note regarding historic data
Readers are cautioned that the historical data on Lakanfla in this written disclosure has not been verified by a Qualified Person. Not all historical samples are available and Altus does not have complete information on the quality assurance or quality control measures taken in connection with the exploration results, or other exploration or testing details regarding these results.
Cautionary Note Regarding Forward-Looking Statements
Certain information included in this announcement, including information relating to future financial or operating performance and other statements that express the expectations of the Directors or estimates of future performance constitute "forward-looking statements". These statements address future events and conditions and, as such, involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by the statements. Such factors include without limitation the completion of planned expenditures, the ability to complete exploration programmes on schedule and the success of exploration programmes. Readers are cautioned not to place undue reliance on the forward-looking information, which speak only as of the date of this announcement and the forward-looking statements contained in this announcement are expressly qualified in their entirety by this cautionary statement.
Where the Company expresses or implies an expectation or belief as to future events or results, such expectation or belief is based on assumptions made in good faith and believed to have a reasonable basis. The forward-looking statements contained in this announcement are made as at the date hereof and the Company assumes no obligation to publicly update or revise any forward-looking information or any forward-looking statements contained in any other announcements whether as a result of new information, future events or otherwise, except as required under applicable law or regulations.
TSX Venture Exchange Disclaimer
Neither the TSX Venture Exchange nor the Investment Industry Regulatory Organisation of Canada accepts responsibility for the adequacy or accuracy of this release.
Glossary of Terms
The following is a glossary of technical terms:
“Au” means gold
“DD” means diamond drilling
“g” means grams “g/t” means grams per tonne “grade(s)” means the quantity of ore or metal in a specified quantity of rock
“JV” means Joint Venture
“km” means kilometres “m” means metres
“NI 43-101” means National Instrument 43-101 “Standards of Disclosure for Mineral Projects” of the Canadian Securities Administrators
“NSR” means net smelter returns
“Qualified Person” means a person that has the education, skills and professional credentials to qualify as a qualified person under NI 43-101
“RC” means Reverse Circulation drilling